The Electra Forums

Guitar Talk about Electra and other vintage imported guitars

Home
Index of Models
The Electra Forums
PM Inbox

FAQ

It is currently Mon Nov 25, 2024 4:10 am

View unanswered posts | View active topics

Board index » The Electra Guitar Forums » Repair & Restoration

All times are UTC - 8 hours

helpful hint - stripped strap button hole fix

Page 1 of 1

[ 8 posts ]

Previous topic | Next topic

Author

Message

markmc

Post subject: helpful hint - stripped strap button hole fix

Posted: Fri Feb 01, 2008 2:26 am

Joined: Thu Jan 31, 2008 12:41 am
Posts: 4
Location: Murfreesboro, TN USA

When you have a strap button hole that is stripped don't force a bigger or longer screw in the hole....or even worse...drill another hole in your guitar and move it over, just get a wood toothpick, put a little wood glue on it and shove it in the hole as far as it will go, break it off or cut it off flush with the body, if there's any excess glue wipe it off with a damp cloth or paper towel, then let it dry for a few hours and put your strap button back on.

Top

X189player

Post subject:

Posted: Fri Feb 01, 2008 12:00 pm

Joined: Sat May 22, 2004 12:17 am
Posts: 1903

it works!

Top

corsair

Post subject:

Posted: Fri Feb 01, 2008 12:26 pm

Joined: Fri Jun 08, 2007 2:06 am
Posts: 1085
Location: Mount Hunter, New South Wales, Australia

...sure does - done it many times!!

Top

sami

Post subject:

Posted: Sat Feb 02, 2008 12:13 am

Joined: Wed Dec 05, 2007 8:49 am
Posts: 70
Location: Austin TX USA

same here! :up:

_________________
Peavey 5150 w/Bias mod
Custom 4x12 birch cab w/Celestion G12T-75's
Ibanez TS808 OD w/Monte Allums mod
ISP Decimator
Electra X260 Invicta
Ibanez RG320DXQM

Top

markymayhem

Post subject:

Posted: Sun Feb 03, 2008 8:51 am

Joined: Mon May 14, 2007 4:43 am
Posts: 77

I screw the button in when the glue is wet. Elmers doesn't stick to metal very well, so it's not like it's gonna never come off. Darn close though! The screw kinda cuts the wet glue and toothpick in to the hole more that way, I think.

Top

markmc

Post subject:

Posted: Sun Feb 03, 2008 12:28 pm

Joined: Thu Jan 31, 2008 12:41 am
Posts: 4
Location: Murfreesboro, TN USA

I've done several without glue and had no problems, lol...I recently was watching some Electras on ebay and saw a beautiful MPC... someone had drilled another hole and moved the strap button over, right by the neck....I was cringing looking at it thinking to myself "why would anyone do that?" I was hoping my tip would save a few guitars, just about every used guitar I have ever bought had at least one strap button that has been altered, usually with a bigger screw. PS: Dunlop dual design strap locks are a wise investment for any guitar, the Dunlop dual design buttons have a wide flare so if you use a strap without the locks installed it is more secure, and of course if you have the locks installed you have no worries. Better safe than sorry.

Top

X189player

Post subject:

Posted: Sun Feb 03, 2008 1:41 pm

Joined: Sat May 22, 2004 12:17 am
Posts: 1903

Good point on the Dunlops- that's always a reason to hesitate adding strap locks, if you can't sontinue to use a normal strap as well.

Top

corsair

Post subject:

Posted: Mon Feb 04, 2008 12:43 pm

Joined: Fri Jun 08, 2007 2:06 am
Posts: 1085
Location: Mount Hunter, New South Wales, Australia

...my ancient Schallers are dual purpose - I had 'em installed on my VA900 before I took it out of the shop in 1980!

Top

Page 1 of 1

[ 8 posts ]

Board index » The Electra Guitar Forums » Repair & Restoration

All times are UTC - 8 hours

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum